Hobby DE LUXE 2018, Руководство по эксплуатации

Страница: 53 / 185

6. Interior structure
49
Hanging table
To lower
• Raise the front end of the table top by approx. 30°.
• Pull down the lower part of the table leg
j
, fold it over by 90°
and lay it on its end.
• Fold out the supporting legs
k
by 90°.
• Pull the table top out of the upper wall brackets
l
.
• Raise the front end of the table top considerably and hook it
diagonally from above into the lower wall brackets
m
.
• Place the supporting legs at the front edge of the table top on
the floor.
3
2
1
4
Hanging table
Supporting legs
Lowered hanging table
6.4 How to convert seating areas into beds
Preparing to convert the bed
• Lower the table ( see Chapter 6.3 Tables ).
• If necessary, fold out the bed expansion in the seating area
(model-specific).
The seat groups can be converted into comfortable beds.
Converting the seating area to a bed
Converting the seating area
Notes on arranging the cushions:
- How to arrange the cushions depends on the caravan model.
- In some caravan models, one or more additional cushions are
required to convert the bed. These are included separately in
the caravan.
- In main seating area, the rear seat cushions
j
remain in place.
- Depending on the model, it may be necessary to remove the
side back
k
and seat cushions
l
. To do this, push the seat
cushions
l
towards the middle and place the back cushions
k
horizontally along the sides. Any open space that can still be
seen/felt should be filled with one or more additional cushions.
.
1
1 1
2
2
3 3
Neither the metal elevating table leg nor the single-post
elevating table leg are fastened to the floor. Before
driving, lower the table and, depending on the model,
secure it with one or two pushbuttons either to the seat
base or to the front/rear wall.
Securing the table