Hobby 4011444108951, Инструкция по эксплуатации

Страница: 24 / 96

8
5. Programming instructions
To activate program mode, press the button.
The
▲
and
▼
buttons are used to switch between the various programming main levels: Clock – Humidity – Tempe-
rature – Timer.
To exit program mode from main level, press and hold the
button for 3 seconds or do not press any buttons for
90 seconds. To switch from sub to main level as well hold the button for 3 seconds.
5.1 Programming the clock
5.1.1 Adjusting the time
The clock symbol fl ashes when program mode is active.
Press the
button, the hours will fl ash –
“12”
.
Use the
▲
and
▼
buttons to set the hours between 0 and 23.
Press the button and the minutes will fl ash -
“00”
.
Use the
▲
and
▼
buttons to set the minutes between 0 and 59.
Press the button, the seconds will fl ash -
“00”
.
Use the
▲
and
▼
buttons to set the seconds between 0 and 59.
Note: Once the clock has been set at least once, you can use
▲
or
▼
to directly access the settings
“HUM”
,
“TEMP”
or
“TIME”
.
Attention: The ClimaControl system does not automatically switch between summer time and winter time.
This change must be entered manually.