10
When finished,
will flash. Scroll to the next main menu item with the
button, then press the
button.
Please note:
In the same manner you can change from to
as
well.
5.5 Temperature alarm setting
When flashing and
was acknowledged with
,
or your last
set alarm temperature value flashes.
Use the
and
buttons to set the +/- alarm between 0.1 °C and 10 °C.
Acknowledge with
button.
Advice:
means that no alarm is set.
When finished, and
will flash again. To finish programming, press and
hold
for 3 seconds until the display returns to operating mode.
6. Reset
Should your HOBBY Biotherm eco not function correctly, please perform a
reset:
1. Unplug from mains
2. Plug the mains plug back in while keeping the
button pressed
3. Release the
button
Attention:
All programmed settings, except those for the clock, are
lost. The HOBBY Biotherm eco will regulate with factory’s presettings.
