Hobby Porter HP-007, Руководство пользователя

Страница: 14 / 20

14
7. REV (REVERSE DIRECTION)
8. ABS (ANTI-BLOCKING SYSTEM)
9. CRAWL (CLIMBING MODE)
• This function is used for correct the control direction of servo or motor.
Feature Set
：
• This function can set the forward and reverse of 6 channels.
• Under the boot menu, enter the selection menu by pressing
the scroll wheel.
a. Rotate the wheel to (REV) menu, press the wheel to enter the
menu operation.
b. Select the channel which need to be adjusted.
c. Press the wheel to enter, and select REV or NOR through
the wheel.
d. After setting, press BACK button to return to the main page
and save.
• This function is used for setting anti-blocking to the throttle output channel (inching braking) , to adapting
different kinds of racing track and the operation habits of different people, to achieve the best braking effect
and the control effect of cornering, without the occurrence of tail swing and insufficient turns.
Feature Set ：
• This function only can adjust the throttle channel.
a. Rotate the wheel to the (ABS) menu, press the wheel to enter
the menu operation.
b. Press the wheel to enter, and select 0N or 0FF by rotating
the wheel.
c. After setting, press BACK button to return to the main page
and save.
• This function is used for setting mixed control of direction wheels, suitable for climbing vehicles which both
front and rear wheels can be set with steering. The default is OFF.
• There are four modes of climbing car mode A, B, C and D. In climbing car mode, CH3
will be assigned to the rear wheel steering, which can not be in dependent controlled
by the buttons.
Feature Set
：
a. Control front wheel steering.
b. Control rear wheel steering.
c. Control the front and rear wheels in the same direction.
d. Control front wheel forward, rear wheel with reverse output.
1. Press the scroll key to enter the(CRAWL) menu operation.
2. Press the wheel to enter, and select the required function by
rotating the wheel.
3. After setting, press BACK button to return to the main page
and save.