15
AerocrAft cAm quAd user’s Guide
mAintenAnce
In general, your Quad-Copter doesn’t require any maintenance or adjustments, however, there
may come a time when you need to replace the propeller blades or replace one or more of the
motors or LED lights. This section covers the most common maintenance requirements you
might encounter.
replAcinG the propeller blAdes
Make sure to install the replacement propeller blades in the correct configuration, or the
Quad-Copter won’t fly correctly. For more information, see the diagram in the Propeller,
Motor and LED Configuration section below.
1) While holding the outrigger arm to support it, gently
pull the propeller blade up and off the motor shaft.
2) Press the replacement propeller blade onto the
motor shaft until it bottoms out.
propeller, motor And led confiGurAtion
Use the diagram below to install the propellers, motors and LED lights in the correct configurations.
If you don’t configure the Quad-Copter as shown, the Quad-Copter won’t fly correctly.
*Clockwise motors feature red and blue wires and counter-clockwise motors feature white and black wires.
LED Yellow
LED White
MOTOR Black
MOTOR White
MOTOR Blue
MOTOR Red
1
2
3
4
5
6
FRONT
Black ‘B2’
(Counter-Clockwise)
Black ‘A1’
(Clockwise)
Red ‘B2’
(Counter-Clockwise)
Red ‘A1’
(Clockwise)
A
B
C
D
E
CAMERA White
CAMERA Black
CAMERA Red
SWITCH Black
SWITCH Yellow
A
B
C
D E
resettinG the trAnsmitter trims
If desired, all four transmitter trims can be reset to their
neutral positions in one step, instead of resetting them
manually.
1) Press and HOLD the Speed button, then turn the
transmitter ON. The transmitter will make a short
series of audible tones, indicating the transmitter
trims have been reset.
