12
When the "FLAP 2" switch is activated the vectored
thrust nozzles will move in unison with the ailerons.
When the ailerons are centered, the vectored thrust
nozzles will be centered.
When right aileron is given, the left vectored thrust
nozzle will move downward and the right vectored
thrust nozzle will move upward.
When left aileron is given, the left vectored thrust
nozzle will move upward and the right vectored thrust
nozzle will move downward.
If you find that the surfaces and vectored thrust
nozzles do not move in unison as shown, you will
need to check the programming in the radio.
Retract Adjustment
The retracts are fully installed when you receive
the model and should not require adjustment.
If you find the servos are binding at either
end of travel, it may be necessary to adjust
the end points in the radio programming.
70mm Fan Install
To replace the stock fan, or to install a 70mm fan,
carefully cut along the line shown in the photo. This
line is the seam between the fuselage and cover.
Align the 70mm fan with the concave area in the
fuselage. Note the direction of the fan in the photo.
Содержание SU-34 Fullback
Страница 1: ......