or for Faster Charging (less balancing accuracy and C/10 termination) at the 10XC interface.
Protects your Pb input source from over-discharge by providing an audible warning when input
voltage of your Pb battery approaches 50% state of charge.
Intelligent controller performs extensive checks to prevent damage to packs and power supply. This
makes it virtually impossible to damage the charger or the batteries from incorrect connections or
wiring; including, but not limited to reverse polarity.
Input reverse-polarity protection.
Simple, effective, 2-button interface allows instant access to presets, preset parameters, and starting
and stopping charger operations.
Access pre-defined, named presets by clicking the MODE button.
Hold the MODE button to access the Main Menu operations: Choose Chg. Amps, Choose Chemistry,
Show Help Screen, Exit. Use the charger’s Main Menu to alter basic settings of presets on-the-fly.
Press and hold the START/STOP button to start charger operation or cancel/end a charging session.
Press and hold MODE button during power up to access Options Menu; choose input amps limit and
supply low voltage setting (Power Management feature), alternate between DEFAULT or XH balance
wiring schemes, and set quiet charging (no speaker beeps during charging).
Supports Bi-directional, optional PC which enables charger firmware updates.
Use available PC software to update charger firmware reliably with the click of your mouse button,
and without sending the charger back to the factory. Keep up-to-date with the latest enhancements
and bug fixes.
Works with a wide range of power supplies, even those not rated for high power. Easily changes
from moderate current bench supply at home to car battery at the field. Set Input supply amps limit
and supply low voltage at the charger interface, to prevent damage to your input source.
January 17, 2012 ver 1.0 www.revolectrix.com
4
