mode:
NODE CONNECTOR?
>[mode]
b.
Press and release the MODE button
to toggle operation between
DEFAULT WIRING
or
XH/EH
WIRING
Note:
DEFAULT WIRING is the Factory Default mode and provides proper operation when using Turnigy
10XC adapters. XH/EH WIRING mode supports the popular JST XH or EH wiring scheme. See the
section “Balance Connector wiring” below for more information about these wiring schemes.
To set the charger for QUIET CHARGING:
a.
Press and hold the MODE button
, then release it when the display changes to this:
QUIET CHARGING?
Hold for More
Note:
If you hold the
MODE button
down longer, you’ll see
Exit
, etc
(described below).
When
you
release the MODE button
, you’ll see the setting for QUIET CHARGING:
QUIET CHARGING
>[Y/N]
b.
Press and release the MODE button
to turn QUIET CHARGING OFF or ON.
Note:
When QUIET CHARGING is turned ON, the charger will not beep to notify you at 99% charge
completion or when the charge is completed. Setting QUIET CHARGING to YES does not disable the
speaker during button presses.
To Exit the Options Menu and return to the Preset Menu:
a.
Press and hold the MODE button
, then release it when the display changes to this:
Exit
Hold for More
Note:
If you hold the
MODE button
down longer, you’ll see
CHOOSE SPLY AMPS
, etc
(described
above).
When
you
release the MODE button
, you’ll see the Preset Menu:
Preset 1
[chem] [BAL]
@
[charge current]
Note:
Remember, any settings you change while in the Options Menu are automatically saved the instant
you make the change. You may Exit the menu at any time. You may also simply cycle power to the
charger to re-start, in which case the Welcome Screen will appear.
Alternate charging modes
Based on what the charger determines about charging conditions, it may enter one of these charging
modes automatically (as indicated in the display):
In
Low Voltage Restore Mode
, the charger automatically attempts to repair an over-discharged pack. Cells
discharged as low as 0.5V may be repaired to as much as 98% of capacity.
In
Safety Charging Mode
, the charger detects that at least one cell is seriously out of balance, and
January 17, 2012 ver 1.0 www.revolectrix.com
17
