manualshive.com logo in svg

Hobbico NexStar ARF, Инструкция по эксплуатации

Поделиться
Скачать
Hobbico NexStar ARF Скачать руководство пользователя страница 6

Replacement parts for the Hobbico NexSTAR ARF are
available using the order numbers in the Replacement Parts
List that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.

To locate a hobby dealer, visit the Hobbico web site at
www.hobbico.com

.

Choose “Where to Buy” at the bottom

of the menu on the left side of the page. Follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer. If a hobby shop is not available,
replacement parts may also be ordered from Tower
Hobbies

®

at www.towerhobbies.com

,

or by calling toll free

(800) 637-6050.

Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721,
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa

®

or MasterCard

®

number and expiration date for payment.

Mail parts orders and payments by personal check to:

Hobby Services

3002 N Apollo Drive, Suite 1

Champaign IL  61822

Be certain to specify the order number exactly as listed in
the  Replacement Parts List. Payment by credit card or
personal check only; no C.O.D.

If additional assistance is required for any reason contact
Product Support by e-mail at:

[email protected]

or by telephone at (217) 398-8970.

REPLACEMENT PARTS LIST 

Order 
Number

Description

How to purchase

HCAA3736 . . Wing kit  . . . . . . . . . . . .Local hobby dealer
HCAA3737 . . Spin-Control Airfoil

Extensions/Speed 
Brakes  . . . . . . . . . . . . .Local hobby dealer

HCAA3738 . . Fuselage kit

w/o engine mount  . . . .Local hobby dealer

HCAA3739 . . Engine mount  . . . . . . .Local hobby dealer
HCAA3740 . . IsoSmooth

engine mount . . . . . . . .Local hobby dealer

HCAA3741 . . Tail set . . . . . . . . . . . . .Local hobby dealer
HCAA3742 . . Landing gear  . . . . . . . .Local hobby dealer
HCAA3743 . . Decal set  . . . . . . . . . . .Local hobby dealer
HCAA3744 . . NexSTAR nylon 

11 x 5 prop  . . . . . . . . .Local hobby dealer
Missing pieces  . .Contact Product Support
Instruction manualContact Product Support
Full-size plans  . . . . . . . . . . . .Not available 

This new mount may look like other aluminum engine
mounts, but make no mistake, it is unique. The engine
mounting lugs are installed in rubber boots that absorb
engine vibration to protect your airframe and radio
components, increasing their life span. The IsoSmooth
engine mount works so well that you should check your
propeller for nicks or cracks, because with this mount, you
won't feel a thing.

The NexSTAR ARF is equipped with a high speed needle
valve extender/limiter to make engine adjustments safer
and easier. The extender/limiter has been set at the factory
to limit the movement of the high speed needle so that it
cannot be adjusted out of the optimum range. This way the
engine will always work at its peak performance without the
worry of engine damage. The extender/limiter will allow the
needle to be set from the leanest desired setting for safe
operation (fully clockwise) to the richest desired setting for
break in (fully counterclockwise).

Extender/Limiter

IsoSmooth

™

Engine Mount

ORDERING REPLACEMENT PARTS

6

Содержание NexStar ARF

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды