SAFETY RULES
ALWAYS LAUNCH THE AIRPLANE AWAY
FROM PEOPLE AND OBSTACLES
NEVER POINT THE AIRPLANE AT
ANYONE OR ANYTHING
ALWAYS LAUNCH SKYWARD
DO NOT LAUNCH INDOORS
1. Choose an open field, free of trees,
power lines and other obstacles. Hold the
Revolt in your hand, over your head, and
switch on the motor with your other hand.
Toss the Revolt into the wind, keeping the
wing level.
2. The Revolt should climb gently and
turn gradually. If it stalls and crashes, adjust
the elevons. If it does not turn, adjust
the elevons. Refer to “
TRIMMING YOUR
ELECTRIC FREE-FLIGHT REVOLT
for details.
IMPORTANT THINGS TO REMEMBER
WHEN YOU ARE FLYING YOUR
ELECTRIC FREE-FLIGHT REVOLT
The most important thing that determines
how well your Revolt flies is how well you
have it trimmed.
Because it can fly high and far, you must
be in a large area away from houses,
streets, trees and overhead wires.
Closely inspect your airplane after every
flight. Make sure the wing and fins are not
broken and that the fuselage is securely
attached to the wing.
Make sure the fins are not cracked or
broken. See the repair section for details.
Always throw the electric free-flight Revolt
into the wind. Do not fly the airplane if it is
too windy.
Never charge your plane for more than 60
seconds. If you do, you may overheat the
batteries in the Revolt or your charger and
damage them.
REPAIR: If the fuselage, wing or fin is
cracked or damaged, apply white glue and
cellophane tape and let dry overnight.
WARNING: Do not use super glue. It will
damage the foam. Always use white glue
and cellophane tape to repair the electric
free-flight Revolt.
Hobbico, Inc.
Champaign, IL 61826
FLYING YOUR ELECTRIC FREE-FLIGHT REVOLT
1. It is important to adjust, or “trim,” your electric free flight Revolt correctly.
2. Before launching the Revolt, grasp the airplane fuselage under the wing, and with the motor off, gently toss the Revolt into the
wind. It should glide straight ahead and settle gently to the ground. See the diagram below.
A = Dive. Bend elevons upward slightly.
B = Stall. Bend elevons down slightly.
C = Correct flight path.
D = To turn left, bend the left elevon up slightly and the
right elevon down slightly.
E = To turn right, bend the right elevon up slightly and
the left elevon down slightly.
3. Repeat step 2 until your airplane glides well.
TRIMMING YOUR ELECTRIC FREE-FLIGHT REVOLT
(Must Be Done Before Flying)
Elevon Adjustments
Elevon Adjustments
A
DIVE
STALL
LEFT TURN
RIGHT TURN
B
D
E
