8
Flight
Flitt uses Optical sensors in order to stay in one area. However, In
order to keep orientation, it is best not to rotate Flitt too much until
you learn how to fl y comfortably. The front is always the camera
facing towards you or facing away from you (selectable in the app).
Therefore, your left, right, forward, and back movements always
follow the Flitt as if you were sitting inside.
Use Low speed (L) when fl ying in small areas. Once you get
comfortable, click the speed icon and try fl ying a little faster using
(M) for Medium speed. This is good for larger indoor rooms. For
outside, you may want to fl y faster yet. Choose (H) for High speed.
Click again, and you will be back to (L) speed.
When moving the controls, try to start your movements with your
fi nger in the center of the circle. Then, slowly slide the direction you
want to go. To change altitude, gently move the slider up and down.
To rotate, swipe the open area in order to frame your photo. Note:
We found that the best pictures are taken from 10 feet (3M) from the
camera or less, with the Flitt positioned a little higher and camera
angled down toward your subject.
Land
To land immediately, push
Power Off
Push and hold until the LED turns off.
It’s easiest to fold up Flitt starting with
the back arms fi rst.
Now head out to your next photo shoot!
Motor Overload Protection
When Flitt makes a hard landing, crashes into a solid object, or
a propeller cannot spin, the motors will turn off to protect the
control board. The app will display a “Motor Shaft Locked” error
when this occurs. Check Flitt for damage before fl ying.
Trimming
The fi ne tuning buttons will appear below and to the right of
the Directional Control. These buttons should be used if Flitt
constantly drifts in the same direction in calm conditions. Take
off and let Flitt hover for a few seconds to check its stability. If it
drifts in one direction, use the opposite trim button to correct it.
For example, if the drone drifts to the left, the right trim button
below the Directional Control should be tapped until the drone
stops drifting in that direction.
Land
TAP
The Flitt LED
will fl ash when
the battery is
getting low.
