16
❍
13. Make sure any servo extension cords you may have
used do not interfere with other systems (servo arms,
pushrods, etc.).
❍
14. Secure the pressure tap (if used) to the muffler with
high temp RTV silicone, thread locking compound or
J.B.Weld.
❍
15. Make sure the fuel lines are connected and are not
kinked.
❍
16. Balance your propeller (and spare propellers).
❍
17. Tighten the propeller nut and spinner.
❍
18. Place your name, address, AMA number and
telephone number on or inside your model.
❍
19. Cycle your receiver battery pack (if necessary) and
make sure it is fully charged.
❍
20. If you wish to photograph your model, do so before
your first flight.
❍
21. Range check your radio when you get to the flying
field.
Remember to think.
Have a ball!
But always stay in control and fly in
a safe manner.
GOOD LUCK AND
GREAT FLYING!
PERSONAL NOTES
Distributed by
www.hobbico.de
ENGLISH
