Page.50.
The PTZ address in the tester must be consistent with the dome camera or decoder, then the
SURVLtest can test .After setting the parameter, the tester can control the PTZ and lens.
To control PTZ by touch screen:
Tap left, right, upward and downward on the touch screen to control the PTZ rotation direction, PTZ
cameras will rotate accordingly. By two fingers move outward and inward on the touch screen to zoom
in and out the PTZ.
To control PTZ by key buttons
Press the key control the PTZ direction of rotation
Press the key or , to switch on or turn off the aperture.
Press the key or , adjust the focus manually
Press the key or , manually adjust the zoom
Set preset position
Setup preset position: move the PTZ camera to the pre-set position, then Tap it and input pre-set
position number. Tap “Set position” to complete set pre-set position.
