LANsmart Pro user manual
Introduction
LANsmart Pro is a hand-held, multifunction Cable Map Tester and Cable Length
Meter.
It has an integrated Analog and Digital Tone Generator
, Port Finder, and Quick
Test. It displays cable map results in a pin-to-pin format including split pairs. By
using TDR (Time Domain Reflect) technology, it provides
a great deal
of accuracy
when measuring cable length and locating split pairs. It is suitable for professional
technicians or installers.
Features:
•
All-in-one tester: wire map, twisted mapping, short location, quick test, cable
length test, self-calibrating ability, analog and digital tone generator and port
finder.
•
Incorporates TDR (Time Domain Reflect) Technology
•
Wire map for open, short, reversed, cross, split, miswire, and shield continuity
•
Wire map results are displayed in a pin-to-pin format
•
Indicates the remote number of the remote identification unit for wire map test
•
Incorporate Short Location function: locate short position,
it determines if
short is in the near or far end of the cable
.
•
Measures twisted pairs of Cat5, Cat5E and Cat6 length without remote
•
Measures
length of
flat 2-pin, 4-pin and 6-pin telephone line
•
Measures coax line length
•
Self-calibrating
ability for non-standard cables length test
to enhance
measuring accuracy
•
Uses both meter and feet standards for cable length display
•
Incorporate Quick Test function: memorize a cable’s pin out as standard, and
test mass cables.
•
Incorporates Port Finder function: locate corresponding socket on hub/switch
•
Its
Analog
Tone Generator sends 1K Hz tone
on all pins or selected single pin
conductors.
•
Its Digital Tone Generator sends Single Tone and Double Tone
.
•
LCD and “
beep
” indicator
•
RJ45/ RJ11/COAX port protection from telephone line damage
•
Replaceable battery, with low battery indicator
Contents
：
1 LANsmart Pro Main Unit
4 Remote Unit: ID1, ID2, ID3, ID4
1
