Hobart WS-55, Инструкции по установке и перечень запасных частей

Страница: 7 / 16

31. Install three (3) AA batteries into salt alarm
controller.
NOTE: When installing batteries - be certain to
inspect connector to ensure it is secure.
32. Re-install back cover to salt alarm controller.
33. Using the adhesive backing on both devices -
place alarm controller and salt alarm connector
box in a position that will allow salt alarm
controller to be seen and heard when it is
activated.
34. Insert phone cable into salt alarm connector box
and salt alarm controller.
NOTE: Salt alarm controller can be mounted up to
100 feet from salt alarm connector box using
standard phone cable from local retailers (7 foot
cable is provide with kit).
35. Check for proper operation by pressing the
recessed red button on bottom of salt alarm
controller. If controller is operating properly -
the indicator light will flash and an audible tone
will be heard.
F25407 (February 2011) Page 7 of 16