HOAF thermHIT 75M Скачать руководство пользователя страница 42

Страница: 42 / 66

Version date: February 13

, 2017

42 Troubleshooting

User instructions

HOAF thermHIT® 75M/100M/125M

Chapter 7 - Troubleshooting

5. The

HOAF

thermHIT® 75M/

100M/125M

ignited, but goes off

after a few seconds.

or..

6. The

HOAF

thermHIT® 75M/

100M/125M

is not

burning evenly.

or..

7. The

HOAF

thermHIT® 75M/

100M/125M

turns on

and off.

Note! After ignition, the tip of the spark plug

"feels" if the flame is present. A perfect

connection between the spark plug and the

automatic firing device is a prerequisite for the

operation of the device. The ionisation flow

should be able to reach the automatic firing

device uninterruptedly.

Check that there is enough gas present in the

gas bottle.

Check that the correct gas is used (no butane!).

Check that the bottle is used.



(for

HOAF thermHIT® 75M/100M/125M

: liquid

intake).

Check that the tip of the spark plug is in the

middle of the flame during burning.



Method:

• Light the burner, lift the burner and look at

least 2 meters behind the burner if the tip of

the spark plug is in the middle of the flame.

Close the gas valve and check that there is no

dirt under the

HOAF thermHIT® 75M/100M/

125M

at the burners.

Make sure the nozzles are "open".



Method:

• Ignite the burner, lift the burner and look at

least 2 meters behind the burner if all burners

smoothly burn.

Check that the voltage is 12 VDC. If not, the

battery is empty and it must be recharged. If the

battery after charging still does not deliver the

required voltage, then the battery must be

replaced

Check the electrical wiring for loose wires and/or

damage.

Check the spark plug cable for damage.

10.

Check the connection of the spark plug cable

with the spark plug.

11.

Check the connection of the automatic firing

device with the spark plug cable.

12.

Replace the automatic firing device with a new

one.

13.

If no solution can be found, please contact the

dealer.

Problem

Action

Содержание thermHIT 75M



































































Результаты поиска

Содержание thermHIT 75M

Отзывы:

HOAF thermHIT 75M, Инструкция пользователя, Страница: 42 / 66

Результаты поиска

Содержание thermHIT 75M

Отзывы: