HNF-NICOLAI XD2 Urban Rohloff Pedelec, Руководство по эксплуатации

Страница: 112 / 128

112
Ergonomic setting
To adjust the saddle position and tilt, loosen the
two Allen screws of the saddle clamp, which are
located in front of and behind the seatpost under
the saddle.
You can now move the saddle horizontally and
adjust the tilt.
Set the tilt of the saddle horizontally or with the saddle tip inclined downwards
slightly. Then tighten the screws to 9-10 Nm.
5.2. Brake lever
You can adjust the brake lever position on the handlebar, the angle of the brake
levers and the lever width.
5.2.1. Adjusting the brake lever position
To hold the handlebar securely while braking, it is
best to only grip the brake levers with your index
and middle fingers.
To achieve this position, you may need to move
the lever sideways so that both fingers can grip the
brake lever as shown in the photo.
By loosening the two T25 screws on the handlebar clamp, the brake lever on the
handlebar can be moved. You may also first have to loosen and move the Bosch
control unit with a suitable Allen key.
Once you have found the right position, first tighten the grips ensuring that they can
still be twisted. Tighten the upper T25 screw so that the upper gap between the two
halves is closed. In the next step, set the angle of the brake levers.