HNC Electric HV610C Series, Руководство пользователя

Страница: 114 / 176

Section V. Parameter Function Table
101
FE.16 User function code 16 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.18
☆
FE.17 User function code 17 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.18
User function code 18 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.19
User function code 19 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.20
User function code 20 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.21
User function code 21 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.22
User function code 22 F0.00~FP.xx,A0.00~Ax.xx,U0.xx
F0.00
☆
FE.23
User function code 23 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.24
User function code 24 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.25
User function code 25 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.26
User function code 26 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.27
User function code 27 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.28
User function code 28 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
FE.29
User function code 29 F0.00~FP.xx,A0.00~Ax.xx,U0.xx F0.00
☆
This function group is the user customization function code.
Users can put the required parameters (among all HV610C function codes) to the FE group as the
user customization function group.
FE group can offer 30 user customization function codes at most.When FE displays F0.00, it means
user function code is null.
In user customization function mode, display of the function codes is defined through FE.00~FE.31.
Sequence is consistent with the FE function codes, skip F0.00.
5.17 Function code management
：
FP.00-FP.04
Code
Description/
Keyboard Display
Setting Range
Factory
Setting
Change
Limit
FP.00
User password
0~10000 0
☆
The password set function is used to prohibit the unauthorized person from viewing and modifying
the parameters.
When the parameter is set to any non-zero number, the password protection function is enabled. If
no password is needed, change the parameter value to 00000.
After the user password is set and takes effect, when entering the password setting state, if the
user password is incorrect, you cannot view and modify the parameter. You can only view the operation
display parameters and stop displaying parameters.
Please keep your password in mind. If you set the password mistakenly orforget the password,
please contact the manufacturer.