4. Assembly for seat
Put the seat (28) on the
aluminum sliding tube (8), use the M6*1.0*12(9)through the end of aluminum sliding tube (8),the
insert the Seat block(10),lock them with screw M6*10(11)
5. Rear stabilizer cover
Attach the cover (2) to the rear stabilizer (3) and lock it up
with screw M5*10(101)
6. Assembly for slide tube bottom cover
1.Remove the pull pin (37)
2.loosen knob(87) and flat washer(88)
3.Fold the aluminum sliding tube, insert the pull pin (37)
4.use the bottom cover (18)cover the underside of
aluminum sliding tube,lock them with screw M5*8 (12)
1
2
