HMS TYTAN 15 Скачать руководство пользователя страница 2

2

hms-fitness.com

NOTES CONCERNIGN SAFETY

This product is intended only for home use and has been designed to ensure optimal safety. 

The following rules shall be obeyed:

 

1. Before starting your workout, consult your physician to check if there are any reasons preventing the use of this fitness equip

-

ment. The doctor’s decision is required if you take medicines that affect your heart work, blood pressure and levels of cholesterol. 

It is also necessary in the case of persons aged over 35 and people with health problems. 

2. Always do your warm-up before training. 

3. During exercise and after its completion the training equipment should be protected from children and animals. 

4. The equipment shall be placed on dry, stable and properly levelled surface. All sharp objects shall be removed from its direct 

vicinity. The equipment should be protected from humidity. Possible surface irregularities should be levelled. It is recommended 

to use special anti-slip base to prevent the equipment displacement during workout.
5. Free space should not be smaller than 0.6 m and 

greater.  Pay  attention  to  worrying  signals.  Incor

-

rect  or  excessive  exercising  means  health  hazard. 

If headache or dizziness, chest pain, irregular heart 

rhythm or other worrying symptoms appear during 

training, the workout shall be stopped immediately 

and a doctor shall be consulted. Incorrect or over-in

-

tensive training can lead to traumas. 

6. than the training space available in directions of 

the  equipment  accessibility.  Free  space  must  also 

include  space  for  emergency  quitting.  If  different 

pieces  of  equipment  are  located  side  by  side,  the 

size of free space can be divided. 

7. Before the first use, and later at regular intervals, 

tightness of all screws, bolts and other joints shall 

be checked.

8. Before starting your exercise, check fixing of parts 

and joints between them. Workout can be started 

only if the equipment is fully operational. 
9. The equipment shall be regularly checked for wearing-out and damages. Only then will it fulfil safety requirements. Special 

attention shall be paid to foam grips, caps on legs and upholstery, which are all fast wearing parts. Damaged parts shall be imme

-

diately repaired or replaced. Until then, the training equipment cannot be used. 

10. Do not put any elements into openings. 

11. Pay attention to protruding adjustment devices and other structural elements that might hinder exercise. 

12. The equipment can only be used according to its intended purpose. If any parts wears out or is damaged, or if you hear wor

-

rying sounds when using the equipment, you should immediately stop exercising. Do not use the equipment again until the pro

-

blem is removed. 

13. Wear comfortable clothes and sport shoes for training. Avoid loose clothes that might catch protruding parts of the equipment 

or limit your mobility. 

14. The equipment falls into class H according to standard EN ISO 20957-1 and is intended for home use only. It cannot serve the

-

rapeutic, rehab or commercial purposes. 

15. When lifting or moving the equipment, maintain correct posture to avoid spine injuries. 

16. The product is intended for adults only. Keep children without supervision away from the equipment. 

17. During installation, follow closely the attached manual instruction and use only such parts that have been included in the pac

-

kage. Before installation, check if all parts from the list are included in the package.

WARNING:

 READ THE INSTRUCTION BEFORE USING THE EQUIPMENT.

WE ARE NOT REPONSIBLE FOR INJURIES OR DAMAGES TO OBJECTS CAUSED BY INCORRECT USE OF THE PRODUCT

MAINTENANCE: 

No aggressive cleaning agents shall be used to clean the equipment. Use a soft, wet cloth to remove dirt and dust. The 

equipment shall be kept in dry places and protected from humidity and corrosion.

TECHNICAL DATA:

Net weight – 370 kg

Dimensions when unfolded – 246 x 332 x 218 cm

Maximum permissible loading of the product – 140 kg

Содержание TYTAN 15

































Отзывы: