HMS TYTAN 15, Инструкция по эксплуатации

Страница: 18 / 32

18
hms-fitness.com
STEP 19
1. Using two screws (155), four washers (116) and two
nuts (119), fix the bearing (144) on the main frame of
the leg press post (121). Note: do not tighten all the
way.
2. Set the openings in bearings (144) with the openings
turned upwards for potential lubrication.
STEP 20
1. Put end cap (69) on the frame (131).
2. Level the openings of the bearing (144),
frame (131) and frame (127).
3. Drive the roller (138) into the openings
of the bearing (144), frame (131) and frame
(127), and lock with screw (151).
4. Tighten the Allen screws on the bearing
rings (144).