PROGRAMS
Manual program
Press “MODE” cycle select four training mode. User can select the speed. Speed default is 1.0km/h.
Training mode 1: Normal counting. Time, Distance, Calorie is increasing. The select function is closed.
Training mode 2: Time Countdown. Under selecting, time window flash, press “+”
“-” to select. The range is 5-99 minute. Default is 30:00.
Training mode 3: Distance Countdown. Under selecting, distance window flash press “+” “-”to select.
The range is 1.0-99.0km. Default is1.0KM.
Training mode 4: Calories Countdown. Under selecting, calories window flicker, press “+” “-” to
select. The range is 20-990CAL. Default is 50CAL.
P1 – P36 Preset Program
Only for time countdown. When selecting, time window flash, press “+” “-” to adjust the value. The
range is 5-99 minute. Default is 30:00. Press “MODE” to return to default value.
Speed divide into 10 segments. Each segment has same time. When run to next segment, it will buzz
3 times in advance. When finish 10 segments, the motor will stop with buzz 5 times.
Press the start key after select, the speed window will display5→4→3→2→1, with 5 tones, after the
countdown to 1, treadmill start gently, speed up slowly to the display, then the constant speed
operation smoothly.
In any state, pull-out safety locks, window displays: E-07and sound buzzer. The treadmill stop.
When running, press the“+” “-” or“quick speed” key to adjust the speed you want.
Press “START” key when running, it will pause. Press “START” key again, it will running, the record
data will keep on.
Press “STOP” key when running, the treadmill will slowly till stop. All will return to the default state.
User program
Press “P” key cycle to “U1-U3”, then press “MODE” key to set or press the “STRAT” key to start
moving. Press “MODE” key can set your own program (10 segments speed). After setting, user can
press “START” to start exercise. The exclusive program for user will be saved. User can press “P” key
cycle select U1-U3 directly.
Body fat function
When the treadmill power on, press the “P” key to select ”FAT “and enter into body fat function.
Press “MODE” key to choose the item serial number; Press “
＋
”
、
“
－
”key to set the parameter.
F1, means Sex, parameter range is 1-2, 1(male), 2(female). The original is Male
F2, means Age, the range is 1-99, the default is 25.
F3, means Height, the range is 100-220CM, the original is 170CM
F4, means Weight, the range is 20-150KG, the default is 70KG
F5, means the parameters setting has finished, and enter into body fat function (BMI), put two hands
on the pulse pad, wait 8 seconds, and the item window will show your BMI.
