Appendix A: Regulatory Compliance
15 (16)
A
Regulatory Compliance
A.1
EMC Compliance (CE)
The product is in compliance with the Electromagnetic Compatibility Directive. More information
and the Declaration of Conformity is found at
.
A.2
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
►
This device may not cause harmful interference.
►
This device must accept any interference received, including interference that may cause
undesired operation.
Product name
CAN-IB210/XMC, CAN-IB610/XMC
CAN-IB410/PMC, CAN-IB810/PMC
Responsible party
HMS Industrial Networks Inc
Address
35 E. Wacker Dr, Suite 1700
Chicago , IL 60601
Phone
+1 312 829 0601
Any changes or modifications not expressly approved by HMS Industrial Networks could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
PC CAN Interface User Manual
4.01.0310.20000 1.2 en-US
