HMS BE4600-i, Инструкция по эксплуатации

Страница: 27 / 50

27
BE4600-i
Adjustment
1) Ask the authorized service representative or professional technician to check if the voltage is suitable, and if the
grounded wire is reliable. Pull the running belt by your hand and check if it turns freely, without screech.
2) Insert one end of the power line into the socket at the forepart of treadmill; plug the other end in the electrical
outlet. Put the emergency stop key on to the corresponding place on the computer.
3) Turn on the switch from “0” to “1”, the computer displays zero, the running belt do not move.
4) Press the “ON/OFF” key, the treadmill runs slowly, check if the computer and running belt work normally.
5) Press the “SPEED” key, and observe the status of the running belt and display on the computer. Please turn off the
machine if the belt runs defectively, adjust it following the rules in “MAINTENANCE AND MALFUNCTION
TREATMENT”.
6) Check all the functions keys on the computer.
7) Pull out emergency stop key, the treadmill should stop immediately; it’ll work when you put it on again.
8) Press the “ON/OFF” key, the treadmill will stop and the incline will return zero, and then turn off the switch.
9) Press “I/-“,it will have some change for the incline. Press program key and it will should the instruction. The
incline will return zero when you stop treadmill.
Operation instruction
After assembly and adjustment you can use the treadmill:
1) Turn on the electrical outlet switch, and put the emergency stop key onto the corresponding place on the computer.
2) Stand on the side extrusions; clip the safety key to your clothing at your waist.
3) Press the “ON/OFF” key, the treadmill runs at a lower speed, you can step on the belt and walk slowly. ( see
COMPUTER INSTRUCTION )
4) Press the “Speed +”,“Speed -” or direct speed key, the speed will change relatively, and you can read the speed on
the computer. You can run slowly for 2~3 minutes, and then run faster if you feel comfortable. You can run freely
with hand away from the handrails when you feel well.
5) During running, you can read speed, time, distance and calorie on the LED.
6) Press “I”,”Incline -“ or quick incline key to change the incline and it will shows LCD.
7) Slowdown when you want to finish your exercise, and run slowly for 2~3 minutes to make your heart rate and
muscle turn to normal.
8) If you can’t keep balance while running at a high speed, you can pull off the emergency stop key, and the treadmill
will stop immediately.
9) Do not step on the running belt to right or left during exercise, or else the running belt will be aberrancy.
10) After exercise, slowdown and press “STOP” key to stop the treadmill. If you want to restart the treadmill, press
“START” key (But the interval between start and stop should be more than 1 minute).
WARNING: Continuously using incline function for more than five times, the function may not work well. This is not
the malfunction but a kind of self-protection. The function would restore in 1 hour.
Folding, Moving and Unfolding Instruction
1) Folding: The treadmill is foldaway. Lift the end of the main frame and fold upwards until the connecting bar
rebound to the cover of cylinder tube. (See figure a)
2) Moving: Press the handrails to make the front base foot away from the ground then push the treadmill after folding.
3) When you want to put the treadmill to the work position, please lift the end of main fame (end cap) a little to make
the foldaway support tube higher than the cylinder cover (see figure a-1), tip the foldaway support tube with your
foot slightly (see figure a-2), press the end of main fame (end cap) forcibly, remove your foot and keep on pressing
the end of main fame for a while. The cylinder will shrink under the weight of itself (see figure b) and the main
fame goes flat.