HMS Anybus Wireless Bridge II, Руководство пользователя

Страница: 31 / 46

Appendix A: Configuration Examples 29 (44)
A Configuration Examples
A.1 Ethernet Bridge via WLAN or Bluetooth
®
(Easy Config)
Fig. 19 Ethernet bridge
This example describes how to connect two Ethernet network segments via WLAN or Bluetooth
using Easy Config.
Configuration
1. Power on the first unit and wait for the LEDs to light up and go out, then press MODE and
release it immediately.
2. Press MODE repeatedly until only LED C is lit (Mode 4), then confirm by pressing and
holding MODE for 2 seconds.
This unit will now be discoverable and open for automatic configuration.
3. Power on the second unit and wait for the LEDs to light up and go out, then press MODE
and release it immediately.
4. Press MODE repeatedly on the second unit until A + C (Mode 5/WLAN) or B + C (Mode 6/
Bluetooth) are lit, then confirm by pressing and holding MODE for 2 seconds.
Unit 2 will now discover and configure unit 1 as a client and configure itself as an access
point. Unit 1 will be assigned the first free IP address in the same Ethernet subnet as unit 2.
Adding More Devices
Up to 6 additional clients can be added by repeating the procedure. Each new client will be
assigned the next free IP address in the current subnet.
Anybus
®
Wireless Bridge II
™
User Manual
SCM-1202-032 1.10 en-US