HMS 5G Starterkit with IO-Link sensors, Руководство пользователя

Страница: 5 / 12

Mounting the Wireless Router on the Starterkit
Unpack the starterkit from the transport case.
Mount the wireless router on the DIN rail for the starterkit (to the left side of the starterkit). Make sure that
the antenna connectors are on the top and power connector on the bottom.
Power Supply
With the starterkit a power supply kit is delivered as well.
•
Mount the appropriate mains power adaptor for your region.
•
Mount the M12 connector of the power cable to the X31 port of the orange IO-Link Master.
•
Mount the orange power connector to the small gateway between the wireless router and the IO-Link
master.
•
Mount the white power connector to the wireless router.
•
Connect the power supply to a mains outlet (230 VAC or 110 VAC)
Antennas
Antennas are connected to the SMA connectors of the device.
Mount two stub antennas on the wireless router. These two antennas should be connected to the ports
marked Cellular 1 and Cellular 2.
For the Wireless Router 5G 4 antennas are needed in order to achieve 3GPP compliance. In this case the
additional two antennas should be connected to the ports marked GNSS and Cellular 3.
Connecting Ethernet
Two Ethernet cables are supplied with the starterkit.
One Ethernet cable has an M12 connector. The M12 connector should be connected to the X22 port on the
Orange IO-Link Master. The other end is connected to port 1 on the wireless router.
The other Ethernet cable is connected to Eth1 of the small gateway next to the IO-Link master (Eth1 is the
top one). The other end of the cable is connected to port 2 of the wireless router.
Test the Sensors
At this stage it is possible to test the sensors.
When idle the stack light should be displaying different "standby" patterns.