HMS Networks Intesis INKNXMHI048O000, Руководство пользователя

Страница: 15 / 26

Intesis
TM
KNX
– Mitsubishi Heavy Industries AC
User’s Manual r1.2 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
15 / 26
LinkBoxEIB
. Configuration & monitoring tool for Intesis TM KNX series
Introduction
LinkBoxEIB is a Windows ® compatible software developed specifically to monitor and
configure Intesis TM KNX series.
The installation procedure and main functions are explained in the
LinkBoxEIB User Manual .
This document can be found in the Doc folder or can be downloaded from the link indicated
in the installation sheet supplied with the Intesis
TM device.
In this section, only the specific case of Mitsubishi Heavy Industries indoor
unit’s integration
to KNX networks will be covered.
Connections configuration
To configure the Intesis TM connection parameters and to see the points list, press on the
Config button in the menu bar (see Figure 4.1). The Mitsubishi Heavy Industries
Configuration window will open (see Figure 4.2). For integrations with large number of
points, there is available an alternative CSV installation procedure explained in the
LinkBoxEIB User Manual.
Figure 4.1 LinkBoxEIB menu bar
4.2.1 Configuration tab
Select the Connection tab to configure the connection parameters. Three subsets of
information are shown in this window: EIB (KNX interface), Intesis IP (IP interface for
configuration) and Mitsubishi Heavy Industries interface parameters (see Figure 4.2).
Figure 4.2 LinkBoxEIB configuration tab
Next, there is an explanation for each of the configuration parameters in each mode.
• KNX interface configuration parameters:
KNX
interface
configuration
MHI
interface
configuration
Intesis IP
interface
configuration