Intesis
TM
BACnet Server
– PROFINET
User Manual r1.0 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
33 / 46
Available SMTP Settings
Name
Description
Server
IP address or name
Max 64 characters
User
Max 64 characters
Password
Max 64 characters
The Ethernet statistics page contains the following information:
Current IP Configuration
Description
DHCP:
-
Host Name:
-
IP Address:
-
Subnet Mask:
-
Gateway Address:
-
DNS Server #1:
-
DNS Server #2:
-
Domain Name:
-
Current Ethernet Configuration
Description
MAC Address:
-
Port 1
Speed:
The current link speed.
Duplex:
The current duplex configuration.
Port 2
Speed:
The current link speed.
Duplex:
The current duplex configuration.
Interface Counters
Description
In Octets:
Received bytes.
In Ucast Packets:
Received unicast packets.
In NUcast packets:
Received non-unicast packets (broadcast and multicast).
In Discards:
Received packets discarded due to no available memory buffers.
In Errors:
Received packets discarded due to reception error.
In Unknown Protos:
Received packets with unsupported protocol type.
Out Octets:
Sent bytes.
Out Ucast packets:
Sent unicast packets.
Out NUcast packets:
Sent non-unicast packets (broadcast and multicast).
Out Discards:
Outgoing packets discarded due to no available memory buffers.
Out Errors:
Transmission errors.
Media Counters
Description
Alignment Errors
Frames received that are not an integral number of octets in length.
FCS Errors
Frames received that do not pass the FCS check.
Single Collisions
Successfully transmitted frames which experienced only one collision
Multiple Collisions
Successfully transmitted frames that experienced more than one collision.
SQE Test Errors
Number of times SQE test error messages are generated.
Deferred Transmissions
Frames for which first transmission attempt is delayed because the
medium is busy.
Late Collisions
Number of times a collision is detected later than 512 bit-times into the
transmission of a packet.
Excessive Collisions
Frames for which a transmission fails due to excessive collisions.
MAC Receive Errors
Frames for which reception of an interface fails due to an internal MAC
sublayer receive error
MAC Transmit Errors
Frames for which transmission fails due to an internal MAC sublayer
receive error.
Carrier Sense Errors
Times that the carrier sense condition was lost or never asserted when
attempted to transmit a frame.
Frame Size Too Long
Frames received that exceed the maximum permitted frame size.
Frame Size Too Short
Frames received that are shorter than lowest permitted frame size.