9 (14)
4.2.3
Connecting Power Wires
Caution
Ensure that the power supply is turned off before connecting it to the
switch.
Use a power supply of 9.6–60 VDC to power the switch.
Max power consumption: 2.64 W.
Procedure
Connect the switch to power:
1.
Insert the positive and negative wires into the
V+
and
V-
contact on the
4
pin terminal block
.
2.
Tighten the
wire-clamp screws
.
3.
Connect the power wires to a
DC switching type power supply
.
Anybus
®
Unmanaged Industrial L2 Switch Startup Guide
SP2555 1.1 en-US
