© HMF, 48336 Sassenberg-Füchtorf
Seite 13
8.1 Lubrication points
The regular intervals for lubrication and maintenance have to been absolutely
respected. The lubrication points (image 4.1 and 2) and the PTO shaft have to been
lubricated every 20 hours.
Image 4
While re-lubrication there might get some lubricant into the soil, the ground water
or into the feed. Therefore we recommend on principle the using of biodegradable
lubricants!
8.2 Resetting and changing of the stick
The sticks (approx. 350 mm long) are screwed to the both stick-rotors. In case of
approx.
30 mm of obsolescence of the sticks
you have to unscrew them at the rotor
and set them on one position further to the outside. After 2 hours of work you should
check and tighten the screws in the rotor in driving direction
right
to the back, in the
rotor in driving direction
left
to the front.
1
2
3
