10
C. Internal Communication
To communicate internally with other COM6000BP operators, press and hold the
B
button while
talking. Release when finished. In single-lane operations, up to four Communicator operators
can have conference-call type communication by all pressing the
A1
,
A2
or
B
button. Everyone
pressing the same button will be heard by everyone else on that channel without interference.
In dual-lane operations, if your Wireless 6000 system was set up for “Split-B” operation, internal
communication will be heard only by Communicator operators in your lane. If your system was not
set up for Split-B operation, internal communication will be heard by all Communicator
operators in both lanes. In dual-lane operations, up to three Communicator operators can have
conference-call type communication by all pressing the
A1
,
A2
or
B
button. Everyone pressing
the same button will be heard by everyone else on that channel without interference.
If a car arrives in a drive-thru lane while internal communication is taking place, priority will be
given to the respective
A
channel for customer communication, which will reduce the number
of internal communication channels available.
D. Speed-Team Operation
Speed team operation is used during high-volume times. An order taker wearing a
Communicator relays orders from outside into the store, using button
A1, A2
or
B
. Placing
the speed-team switch, on the base station, in the ON position (shown in Figure 2) will disable
the outside speaker and microphone, and the vehicle-alert tone.
E. Wired Backup System
In order to use a wired backup system, you must have a Switcher Board (optional) in your base
station. Open the base station, and look for the board shown in Figure 8. If there is no Switcher
Board, it will not be possible to use a wired backup system. If there is a Switcher Board, place
the S2 switch in the IN position to use the wired backup system. When using the Wireless 6000
system, the S2 switch must be in the OUT position.
Figure 8. S2 switch on Switcher Board
