HMC MJ-USB, Руководство пользователя

Страница: 4 / 8

HMC International NV
Page: 4/8
E3-Laan 89 - 9800 Deinze (Belgium)
Tel +32 (0)9 381 09 50 - Fax +32 (0)9 381 09 51
info@hmc -products.com - www.hmc -products.com
Document Number: 0001-8008a-0100a
2.3.2.3 Splitter cable
It is possible to connect a splitter cable (0044-5014a) to Switch S1 and/or to Switch S2.
This makes it possible to connect up to 4 buttons. Additional functions like middle click,
left hold, middle hold, scroll up, scroll down, etc. can be assigned to it.
2.3.2.4 Indication LED
The indication LED is used to give some information about the MJ-USB.
Status Indicator Status of MJ
Green Joystick is operational
Fast Red pulse Drive inhibit
1 red pulse Reference Signal failed
2 red pulses Hall sensors failed
3 red pulses X, Y Signal failed
4 red pulses device type mismatch
5 red pulses communication problems
6 red pulses device reports severe failure
7 red pulses test/calibration failure
8 red pulses watchdog failure
9 red pulses overflow failure
10 red pulses program/memory failure
Failure
Normal Operation
2.4 Diagnostic Screen
When an error is detected, a diagnostics screen will be displayed.
The status LEDs will flash periodically a green flash and a number of red flashes. The
number of red flashes is an indication of the fault.
1. Status LEDs