HM Electronics ION IQ NDT, Руководство по эксплуатации

Страница: 3 / 32

2
Display
screen
Menu-select
buttons
Help button
Back button
Activity
indicators
Reset switch
(recessed)
Cabinet latches
(not shown)
Base Station
All functions of the audio system are channeled through the base station. It is
the electronic heart of the ion|IQ
®
NDT. External base station features are
shown in Figure 2. Internal connectors and controls are shown in Figure 8 .

The menu-select buttons are used to make selections from the menu on the
display screen.

The Help button can be pushed to obtain information needed in case of problems
with the ion|IQ
®
NDT.

The Back button can be pushed to go back to the previous menu display, saving
any setting changes or exiting a display screen when no changes have been made.

The activity indicators light up as follows:
Above the line – Group 1 activity
A1 lights up when the A1 button is pushed on any Group 1 headset/belt-pac.
B1 lights up when the B button is pushed on any Group 1 headset/belt-pac.
Below the line – Group 2 activity
A2 lights up when the A2 button is pushed on any Group 2 headset/belt-pac.
B2 lights up when the B button is pushed on any Group 2 headset/belt-pac.

When both of the cabinet latches , on top of the cabinet are pressed down at the
same time, the cabinet can be opened by pulling forward and down.

The reset switch is used to perform a soft restart of the base station. It is located
in a small hole on the right side of the base station. To press the reset switch,
carefully push a small pointed object, such as an unfolded paper clip, into the hole.
Figure 2. Base station front panel features