5
Antenna
connectors
BASE STATION SETUP
Locate the two base station antennas and the AC power adapter and power cable received with the base station,
and connect them to the base station as described below.
Equipment Connections
Step 1.
Connect the two enclosed
antennas to the antenna
connectors on the top and right
side of the base station, shown to
the right. Position the antennas
at right angles to each other.
The illustration below shows one
possible arrangement. Turn the
sleeve on each of the antenna
connectors clockwise to tighten
the antennas securely in position.
Step 2.
Note which of the following applies to you.
•
If using the DX100 with AC power
⎯
Plug the connector at the end of the AC power supply
cord into the
power connector on top of the base station. Turn the sleeve on the cable connector
clockwise to secure it to the base station. Plug the large female connector at one end of the AC
power cord into the power supply. Plug the other end of the AC power cord into an electrical outlet.
Sleeves
Power
connector
POWER
light
PWR button
Antenna
Antenna
AC power supply
Power
cord
Power cable
connector
Sleeve
Having a fully charged (or new) battery in its battery compartment when operating the DX100 with
AC or external DC power can prevent interruption of communication during a power outage, as the
DX100 base will automatically switch to battery power.
