OPERATING
THE
COMPUTER
SOFTWARE
I.M. HLF 4600 G1/2/F Eng V2-2010
65
HLF Italian Design
Each change has to be confirmed by pushing button 3, which is going also to switch to
the next pre-selection button.
After the five pre-selection buttons, menu
PreSelection Key
is finished. Push button 5
to quit and go to the next menu
5.3.5 Change Password
This menu is used to change the password that is request to gain into the software of
the HLF 4600 G coffee maker.
Push button 1 or 2 till the message
P R O G R A M Change Password
will appear on
the LCD display.
P R O G R A M
Change Password
By pushing again button 3, the message
P R O G R A M Password= 1111
will appear
on the LCD display.
P R O G R A M
Password= 1111
This is the current password assigned by the factory. It can be changed using the drink
buttons on the drink selection panel. The combination of the numbers from 1 to 4 can be
used to create a new password.
To set the password insert four digits and push button 3 to save the new password into
the memory, and to quit the menu.
WARNING
Inside this function, any buttons can be use to create a new password, therefore is very
easy to push a button by mistake and create accidentally a new password which is
going to be request the next will be necessary to gain into the software.
Unless is necessary to change the password, quit this menu by pushing the red button
inside the front door, in order to prevent accidental mistakes.
