This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1)•This device may not cause harmful interference and
(2)•This device must accept any interference received, including interference that may cause undesired operation
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID can not be used on the final product. In these circumstances, the
OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
This device is intended only for OEM integrators under the following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna and users. As long as
conditions above is met, further transmitter test will not be required. However,the OEMintegrator is still
responsible for testing their end-product for any additional compliance requirements required with this module
installed (for example,digital device emissions, PC peripheral requirements,etc.).
