HL-TECH Corporation
12
1.1.4
Setup Other Group:
Press “
Advanced setting
” in Figure 1-2 to enter the “
Advanced setting
” page.
Figure 1-6
Select the Window User Interface by the “
Language
” down drop menu. If the
English
item is selected, all functions of window are described with English. Select
the
Traditional Chinese
item, and they are described with Traditional Chinese.
At “
Power consumption Setting
” group, select which power save level want to be set
by checking CAM Mode, Maximum Power-Saving mode or Fast Power-Saving
mode. The default is CAM mode. If the most save mode want to use, select the
Maximum Power-Saving mode, but it throughput is lower than CAM and Fast
Power-Saving mode. The throughput of “
Fast Power-Saving mode
” is better than
“
Maximum Power-Saving mode
”, but its power save is less than “
Maximum
Power-Saving mode
”.
At “
Country Roaming
” group, the default depends on the region of EEPROM.
Select other region from “
User Select
” drop down menu, or check “
World Mode
”
item to set it to the word mode. When the word mode is set, it depends on the
behavior of AP. If the WLAN card is re-plug , the setting will return to default
setting.
At “
Fragmentation Threshold
” bar, drop and move cursor to set the fragmentation
threshold point, the range is from 256 to 2346 bytes.
At “
RTS / CTS Threshold
” bar, drop and move the cursor to set the RTS threshold
point, the range is from 0 to 2347 bytes.
