14.
If you do not wish to activate the false front functionality,
do not carry out this step. To activate false front functionality,
stick your hand past shutter seal and into bin to attach the
shutter stop.
13.
With bin in the same position, click shutter stop into
place in its hinges. Make sure shutter stop is installed in a
way that places the encircled plastic grip on inside of the
bin.
3eBin
™
- Gravity bin assembly instructions
10.
On a flat surface, position the two halves of the body as above. Fit the protruding pods at the back of the left bin
body into the corresponding, square openings you can see at the back of the right bin body. Then move the rest of the
left and right bin body towards each other.
11.
Ensure shutter seal is inserted into
the other bin body half as well.
12.
When eventually connecting both body halves, make sure latches click
into each other. There are 8 latches in total - 2 large ones, 6 small ones.
Plastic grip
Protruding pods
Square openings
Latches
Latches
4
