9.
Slide shutter seal onto any of the two bin body halves.
8.
Attach label holder onto front by using slits on each
respective side of the bin. Ensure you hear one click per
side as label holder clicks into slit of each respective side
of the bin.
3eBin
™
- Gravity bin assembly instructions
6.
Push shutter in the direction opposite of the nozzle until the shutter’s holes overlap with handle’s holes. Click plugs
into the holes in the sides of front, securing the handle to the front. Do this for both plugs. Make sure you hear one click
per plug being attached – if not, keep trying by pushing the front and the shutter together using both hands as shown
in the right picture above.
7.
Slide
sleeve
over top the nozzle with the part of the sleeve with a ridge making contact with the nozzle first.
Simultaneously, make sure streak is placed on backside of nozzle.
Ridge
Streak
3
