ー 3 ー
ー 4 ー
11
.
Revision of Manual
For questions about this product, any optional, lost, defective and/or damaged
parts, please contact your dealer.
8. Maintenance
9. Repair Service
10. Product Specifications
BOOST CONTROLLER
installation
location
Pressure sensor location (
Channel
1)
Connect the harness of BOOST
CONTROLLER
Install
BOOST CONTROLLER
main
unit
6. Recommended BOOST CONTROLLER installation location and Pressure sensor location
Direction of view
Direction of view
● Do not try to repair the product yourself. Consult with your dealer.
● If any unusual noises, scents, and/or vibrations are noticed while driving,
please refer to a factory repair manual.
● Do not use this product if unusual occurrences should occur to avoid risk of
electrical shock and/or fire. Consult with the dealer immediately.
● Operating Voltage
…………………………
DC5V - 16V
● Operating Temperature
……………………
-20 - 100℃
● Outer Size …………………………………… 90.0 x 84.0 x 35.0mm
WARNING
CAUTION
Details
1st Edition
Date
2021/09
Rev. Number
3-1.01
Symptom
The check lamp blinks only
when the BOOST CONT
ROLLER is connected.
Or boost does not go up.
BOOST CONTROLLER's
LED is blinking.
Factory boost meter
doesn't display an increase
in pressure.
Cause
The connector is
disconnected.
Wire harness is broken.
BOOST CONTROLLER is
out of order.
Data writing failed with
Easy Writer exclusive
for Power Editor.
Features of factory boost
meter.
Measure
Reseat connector of BOOST
CONTROLLER main unit and
pressure sensor connector.
Request repair of BOOST
CONTROLLER.
Write data again with Easy Writer
exclusive for Power Editor.
Factory boost meter might not
display an increase in pressure.
This issue doesn't affect vehicle
operation.
When the product does not function properly, check the following to see if there
is any measure against the symptom appeared.
7. Troubleshooting
Direction of view
Pressure sensor location (
Channel
2)
Connect the harness of BOOST
CONTROLLER
※Sensor is under the circle.
We recommend to remove the air intake before installation.
※Sensor is right under the battery case.
Please remove the battery and battery case to exchange.