−
25
−
<Setting>
・
From the menu, select [DIGITAL] using the direction button of the controller. Press the ENTER.
・
Press the SELECT button of the controller to switch to [DIGITAL SELECT].
●
DIGITAL 1 - 3 (Selecting items to indicate)
・
To change individual settings, select from DIGITAL 1 - 3 using the directional arrow buttons.
Press ENTER. After the character color changes from white to orange, the setting can be edited.
・
To edit, select 1 from a possible 25 items using the directional arrow buttons. Press ENTER.
When the character color changes from orange to white, the edit is complete. (When "NONE"
appears, it means that there is no item to show.)
・
If more items needed to be edited, repeat the procedure above.
Advice
・
Only DIGITAL 1 - 3 from DIGITAL 1 - 6 are shown in the 3 digital / bar graph.
DIGITAL 4-6 are not shown.
After setting is complete, press the BACK button of the controller to go back to [DIGITAL].
<Indicated Contents>
The same data is shown regardless of whether 6 digital meters or the 3 digital/bar graphs are used.
●
REAL TIME Indication
・
Switch between the 6 digital meters and the 3 digital/bar graphs by pressing ENTER.
・
The bar graph consists of 20 bars.
・
Real time values and Peak values are shown on the screen.
●
PEAK Indication
・
Peak Value Indication
Pressing the Peak button of the controller turns on the peak indicator in the digital meter,
in green. Also, the color of the values in the digital meter changes from white to green,
and the peak values are shown.
・
Reset Peak Value
Press the ENTER of the controller to reset the peak value.
・
Exit Peak Indication
Press the BACK button of the controller to exit.
Advice
・
The values on the 3 digital/bar graph are always Real Time values.
・
The range of the 3 digital/bar graph is the same as the range of the values for the WARNING
setting in the SET UP mode. E.g.: The bar graph for SPEED is shown in the range of
0-186 MPH by 20 bars.
●
WARNING Indicator
・
When the warning function is activated, the color of the warning indicator changes to red;
the values of the digital meters changes from white to red, and the warning buzzer sounds.
・
For setting of this function, see the warning setting under the SET UP mode.
Advice
・
WARNING functions only for the item on the screen. To see other items' warning setting,
select the desired item to be shown on the screen.
・
If selecting the same item, the same data is shown on each screen.
