�Caution
eoo not raise the boost excessively. It may cause damage to the engine
and/ or the turbocharger.
eThe warning function must be activated to prevent any damage to the
engine caused by over-boosting.
eoo not test the product on the vehicle on a public road.
e1f this product or the vehicle does not perform properly, consult your
authorized dealer immediately.
eoo not repair the product by yourself.
e1f an unusual noise, smell and/or vibration is noticed, take the necessary
measurements referring to the user's manual.
e1nsulate wires left on the vehicle after removal of the product. It may
cause damage to the electronic parts.
eoaily check-up of the vehicle must be done by the owner.
eThis manual shows a typical installation. Actual installations may vary depending on
the vehicle application.
eRefer to the factory manual when removing the factory parts.
eMake sure all connections and wiring are correct.
eoo not lose and/or damage any removed parts.
euse the appropriate tools to tighten bolts and nuts with the correct torque specs to
avoid damage.
eMake sure not to disconnect any wiring from the vehicle when installing the product.
eFor a vehicle equipped with a boost control solenoid valve, remove the connector or
hose to deactivate its function.
eThere might be a dot that doesn't light and a dot that always lights in the display.
This is due to the characteristic of the liquid crystal panel, and it is not mulfunction.
45003-AK0 13
7
L
& (0)1\f-&QQgj,