Hkoenig V24, Инструкция по эксплуатации

Страница: 15 / 102

and pressing the steam button .
lmprints left in carpets by furniture can be removed by applying
steam on the parts where the pile is crushed and the brushing
lightly.
_ I f the carpet is made of synthetic material, do not select a high
temperature.
How to get a professional ironing finish
A normal iron generates only a small quantity of steam. ln this case it is necessary to products
steam constantly in order to eliminate crease in the fabric being ironed.
A professional ironing system works rather differently. The fabric is first made damp by the steam
and then
, in a second phase , dry-ironed in the normal way. This means that every . Tiniest crease
is removed and your garments are ironed to perfection.
ln
the first phase (steam-damping of the fabric) , hold the ira about 20 cm above the fabric and
press the steam(3). Pass the iron over the garment in a circular movement so that the powerful
jet of steam damps the fabric. Lightly creased garments require only a few moments of steaming
.
While very heavy fabrics or garments with particularly difficult creases must be damper , so steam
must be applied for a few seconds more .
During the second phase (dry ironing) , check that the thermostat knob is in the correct position
for the type of fabrics; release the steam button(3) and dry-iron the garment. The special ironing
plate will prevent the fabrics from becoming shiny. Using this ironing technique
, and following the
suggestions in the chart below , you
will
find it easy to give your garments a really
professional ironing finish.