the ice chips may be removed by disconnecting the power cord
and gently pushing the shovel to the rear of the cabinet and
removing the ice chips, then restarting.
2.
Please check if the water reservoir is flat when the ice shovel
can not remove the ice to ice basket. If not, please push the ice
shovel gently by finger, then press POWER button to restart.
PROBLEM
POSSIBLE CAUSE
SUGGESTED SOLUTIONS
The compressor
works abnormally
with a Buzzing
Noise
The voltage is lower
than
recommended
Stop the Ice maker and do not
restart until the voltage is normal.
Water shortage
indicator
light is on
1.There is no water
2.The pump is full of
air
1.Add to some water until it
reaches MAX position
2.Press POWER button to restart
Indicator lights on
display are not on
Blown
fuse/
No
power
Replace fuse / Turn power on
The Ice made is
too large
and with pieces
sticking
together.
1.water temperature
is too low
2.Ice of previous
cycles left in the
water tray
1.Select small size
2.Take out the ice under the
standby state
All indicators
twinkle
simultaneously
Water tray is blocked
by ice cube
Unplug the power to take out the
ice which blocking the tray, then
plug the power and press the
POWER button, the machine will
restart 3mins later.
WARNING
Fill with potable water only.
It is normal for the compressor and condenser surface to
reach temperatures between 70°C and 90°C during operation
and surrounding areas may be very hot.
Due to fast freezing, ice cubes may appear “Cloudy”. This is
air trapped in the water and will not affect quality or taste of
