the cleaner to use.
Key Points:
The power supply of the cleaner must be cut off before
replacing any filter!
Faults and repair
In case of abnormality with this product, please treat it in the way as stated hereinafter; if the cleaner
still refuses to work normally, please contact the stop from where this product was bought or with
the appointed service point.
Fault
Treatment
The cleaner
cannot operate.
1.
Check whether the power plug is inserted securely; pull
out the plug and then reinsert it in the power socket;
2.
Check whether the power socket is electrified;
3. Check whether the switch of the cleaner is in “ON”
position.
The suction force
is reduced.
1.
Check whether the floor brush, the hose and the spile are
jammed, and remove any blockage immediately;
2.
Check whether the air-inlet filter gauze is dusty; frequently
clean rubbish or replace air-inlet and air-outlet HEPA;
There is abnormal
sound when the
motor is under
operation.
1. Stop the cleaner immediately;
2. Check whether the floor brush, the hose and the spile are
jammed, and remove any blockage immediately.
After-sale service
When abnormalities or problems are found with the product in use, please contact the appointed
service point for consultation or repair.
ENVIRONMENT
CAUTION :
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your local
authorities about the places where you can return this product. In fact, electrical and
electronic products contain hazardous substances that have harmful effects on the
environment or human health and should be recycled. The symbol here indicates that electrical
and electronic equipment should be chosen carefully, a wheeled waste container is marked with
a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com - [email protected] - [email protected] - Tél: +33 1 64 67 00 05
