Downrod
Clip
Set Screw
Yoke
Downrod
Pin
Downrod
6
Motor Screw
ASSEMBLY INSTRUCTIONS
1
3
Mounting Bracket Screw
2
4
2. Loosen all four mounting bracket screws located on the
mounting bracket and completely remove the two screws
from the round holes in the canopy. Save the screws for
later. Remove the canopy from the mounting bracket.
Then, install the mounting bracket to the outlet box (sold
separately) using the screws and washers provided with
the outlet box.
WARNING:
To reduce the risk of fire, electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting screws
and washers provided with the outlet box.
3. Remove the 6 Phillips-head motor screws from the top
part of the motor and set aside for later use.
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
DANGER:
Failure to disconnect the power supply prior to
installation may result in serious injury or death.
4. Remove the downrod clip and downrod pin from the
downrod. Then, loosen but do not remove the two set
screws at the top of the yoke.