39
ENGLISH
Before Starting This Unit
1-
Select a suitable location, make sure you have easy access to an electrical outlet.
2-
Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.3 and Fig. 3a.
3-
Plug the unit into a 220-240V~50Hz grounded electrical outlet.
4-
Make sure the Water tank is correctly positioned inside the cabinet otherwise the unit will not operate (Fig. 4a).
5-
To turn the unit on, press the ON/OFF switch.
(1) Before use.
DEHUMIDIFYING AND COOLING OPERATIONS:
•
The operating range for dehumidifying is 13ºC-30ºC, and the operating temperature range for cooling operating is
17ºC-30ºC.
•
If the cooling or dehumidifying operations have been switched off and need switching on again in a short time, allow
approximately three minutes for the cooling or dehumidifying operations to resume.
•
Ensure that the drain tank is properly placed in the unit.
POWER SUPPLY:
•
The operation condition is 18ºC-35ºC.
•
Insert the AC Power Plug to a AC socket.
•
Do not connect the air conditioner to a multiple socket outlet which is also being used for other electrical appliance.
•
Be sure the power supply is AC 220-240V~50Hz.
(2) Cooling operation.
•
Press the "MODE" button several times until the "COOL" indicator lights.
•
Press the button " " (up) or " " (down) to select your desired room temperature. (17ºC- 30ºC)
•
Press the "FAN" button to choose the fan speed. (High – Med – Low).
OPERATING
Note:
Step 2 is required only while using the COOLING MODE.
Fig. 3
Fig. 3a
Fig. 4
Manual 01-05Hiyasu Eng 11/3/05 13:29 Página 39
