Hiwin HM-S, Руководство по сборке

Страница: 9 / 100

Basic safety notices
9
Assembly Instructions
Linear Axes HM-S and HT-S
HMS_HTS-01-0-EN-1905-MA
Activity Qualification
Normal operation Trained personnel
Cleaning Trained personnel
Maintenance Trained specialist personnel of the operator or manufacturer
Repair Trained specialist personnel of the operator or manufacturer
Transportation Trained personnel
Assembly Trained specialist personnel
Disassembly Trained specialist personnel
Table 2.1 Personnel requirements
Operating phase Personal protective equipment
Normal operation No persons may remain at the HM-S and HT-S linear axes during normal opera-
tions. Persons near the HM-S and HT-S linear axes must wear the following
personal protective equipment depending on the travel speed:
Safety shoes
If necessary, hearing protection
All other operating phases
(cleaning, maintenance, resetting,
troubleshooting, repair)
The following personal protective equipment is needed for all other operating
phases of the HM-S and HT-S linear axes:
Safety shoes
If necessary, safety gloves and safety goggles
If necessary, hearing protection
Table 2.2 Personal protective equipment
Model No: HM060S010C0755L000ANNN
ID-No: 24-12345
S/N: S-123456789
Weight: 5kg
Mfg. date: 2015/03
HIWIN GmbH
Brücklesbünd 1
77654 Offenburg
Fig. 2.1 Type plate (example only)
2.5 Personnel requirements
Only authorised and competent persons may carry out work on the HM-S and HT-S linear axes! They must be familiar with
the safety equipment and regulations before starting work (see Table 2.1).
2.6 Protective equipment
2.6.1 Personal protective equipment
2.7 Labels on the linear axis system
The HM-S and HT-S linear axes bear the labels depicted in the following.
2.7.1 Type plate