HiWeigh BTH Series, Руководство пользователя, Страница: 23 / 26

4. TROUBLE SHOOTING
If you come across any problem, you can check it by you self and find the
reasons.
FAULT REASON SOLUTION
No display 1.Not connected to the power
supply;
2.Fuse is broken;
3.Power transformer damage;
4.The chips lose memory
5.The cable loose 1.Plug in the power line;
2.Replace the fuse;
3.Replacement of power
transformer;
4.Multi-Calibration the balance
5.Check the cable which connect
display with mainboard.
Contact factory
Weighing
unstable Bad working conditions;
The wind screen is open
Something between the table
and balance
The power unstable
Weighing unstable
Keep the environment stable, close
the windows and doors
Close the glass door
Take away the things
Connect the stable power
The weighing
digits is wrong The balance not calibration.
Not tare before weighing.
No adjust the level. Calibration.
Tare before weighing.
Adjust the level feet.
Over Load The weight things heavy than
capacity. Keep the weighing things small than
capacity
Under Load The weight small than zero Tare and weighing again
Listen the
Buzzer voice
The weight out of limit Reset the limit upper and lower
setting.
20