Chapter 2.
Installation and Configuration
2.1 Package Contents
The package contains the following.
PTZ Dome (Dome Camera)
1
Instruction Manual (This Document)
1
Modular Cable
1
Interface Board
1
Accessory Kit for Installing PTZ Dome
1
Template Sheet
1
2.2 Base Installation
1.
Connect power and communication lines to the dome base board.
(See Figure 1)
2.
(See Figure 2)
3.
Attach the plate cable box to the housing using the supplied M3x6
machine screws.
(See Figure 2,3)
4.
Loosen the four torx screws located midway in the front of the
housing and leave the screws intact.
(See Figure 4)
5.
Drill the mounting location, using the bottom of the housing(or
template sheet) as a template.
(See Figure 5)
6.
Attach the housing to the ceiling using the supplied M6x35 tapping
screws.
(See Figure 5)
7.
Closing the housing using the loosen torx screws.
(See Figure 6)
Fit the hole grommet on the cable and attach the gasket to the
housing.
3